JVC GC-A33 manual Using your Camera as a PC-Camera WebCam, EN-20

Using your Camera as a PC-Camera (WebCam)

Aside from taking pictures, you can also use your camera as a PC-Camera (WebCam).

Using your camera as a PC-camera (WebCam) with Microsoft Netmeeting:

1.Make sure you have installed the Dual

Mode USB camera driver (refer to page 18).

2. Connect a USB cable to the camera and to your PC’s USB port.

3. Press the Power button to turn on the camera.

4. Set the camera to PC mode.

5.Launch your PC-Camera (WebCam)

Application Software.

6. Follow the instructions of the software.

7. After finishing, be sure to turn off your PC first, then disconnect the USB cable from the camera and PC.

Note

No PC-Camera (WebCam) Application Software is included in the CD-ROM. Please use a commercially available videoconferencing program such as Microsoft Netmeeting. To use the camera for videoconference via the Internet or LAN connection, you also need a networking device such as a modem or TA (Terminal Adapter), as well as speakers and a microphone.

For more information about the operation of videoconference application software, please refer to its respective software help.

 When the camera is attached to your computer, only the power and Mode/Menu buttons can be used.

If the camera does not work properly after connecting to a PC, remove the batteries once and insert them back into the camera, then try again.

EN-20