Getting Started, Inserting Batteries, 11-EN | JVC GC-A33 instruction

Getting Started

Before you start taking digital pictures with your camera, insert the (AA-size Alkaline) batteries. When you use your camera as a video camera for your PC, you won’t need batteries. The camera absorbs power from your computer through the USB port.

Inserting Batteries

1. On the bottom of the camera, slide the battery door in the direction indicated by the arrow to open it.

2.Insert two (2) AA-size batteries as indicated

on the inner side of the battery door.

3.Close the battery door and turn on the camera.

If you are using new batteries with your camera, the Battery Power icon on the LCD panel will be fully shaded.

After using the camera for some time and the battery power becomes low, only the lower portion of the Battery Power icon will appear shaded. This indicates that the batteries are weak and need to be replaced.

Note

Insert the batteries in the correct positive and negative polarities.

Remove the batteries if the camera is not used for an extended period of time to prevent leaks or corrosion.

Never use manganese batteries.

Never mix old and new batteries.

Low temperatures (under 0°C or 32°F) reduce the output efficiency of batteries, thereby shortening the operation time of the camera.

The recommended battery is AA size alkaline battery.

When discarding the batteries, cover the positive and negative terminals with adhesive tapes.

ENGLISH

11-EN

Image 11

JVC GC-A33 manual Getting Started, Inserting Batteries, 11-EN

Contents

GC-A33 EN-2 Some DO’S and DON’TS on the Safe USE of Equipment Information for Canada Renseignement Pour Canada EN-4 Safety Precautions Espa OLÑ To protect the unit, do not For safety, do notAvoid using the unit Do not leave the unit Before Using the Camera Contents System Requirements PC FeaturesFun Things You Can Do What’s Inside EN-10 Getting to Know the Camera 11-EN Getting StartedInserting Batteries To attach the strap to your camera Taking PicturesAttaching the Hand Strap EN-12 Changing Modes Status Light IndicatorAuto Power Off Camera Operating Modes Flash No Flash Auto Flash Image quality settingsSelf-timer mode EN-14 Self-Timer Off Self-Timer On Adjusting the Settings in Record ModeSetting Picture Quality Setting the Self-Timer To set the Auto Flash mode Setting the Auto Flash ModeSetting the Exposure Value To set the Self-Timer 17-EN Deleting Pictures from MemoryTo delete a picture from memory To delete all pictures from memory EN-18 Camera Driver and Application InstallationConnecting to Your Computer Downloading Pictures into your PC 19-EN Downloading and Saving Images to your Hard DiskClick Get Click Digital Camera Twain EN-20 Using your Camera as a PC-Camera WebCam LCD panel Icons Record Mode PC ModeDelete Mode Appendix 1 LCD Icons EN-22 Appendix 2 Camera Specifications Memo GC-A33