IBM SC30-3681-08 manual Default is 30 minutes, Be used for the duration of the connection

DIALs Server name - up to 30 chars: (DIALOUT_SERVER)

7.Enter the name of the DIALs server. The default is DIALOUT_SERVER. This is the name of the server that will be displayed when dial-out clients ²discover² DIALs Dial-out Servers on the network when they invoke the DIALs client's CHOOSER application.

Dial-out client type(s) supported (DIALs, TELNET, BOTH): [BOTH]

8.The previous question determines what level of dial-out support is turned on for the router. DIALs refers to supporting the IBM DIALs dial-out clients. Telnet dial-out refers to the ability to dial-out from a LAN based client using either a telnet application or a telnet serial port application. The default setting is to have both enabled.

Inactive time before a connection is dropped, 0 is unlimited: (30)

9. The previous question pertains to how long a dial-out circuit is active while no

data is being transmitted or received. It should be set to the number of minutes

that a connection over a dial-out circuit can be active without traffic. The

default is 30 minutes.

Dial-in IP address assignment:

Allow clients to specify their own IP address? (Yes, No, Quit) [No] y

10. The previous question allows dial-in clients to provide their own IP address to

be used for the duration of the connection.

Assign address using the PPP User Profile? (Yes, No, Quit) [No] y

11. The previous question enables the device to provide the IP address in the PPP

User Pro®le to the client to use for the duration of the connection.

Assign address based on the dial-in interface? (Yes, No, Quit) [No] y

12. The previous question enables the device to provide the IP address in the

Dial-in interface for the client to use for the duration of the connection.

Assign address using IP address pools? (Yes, No, Quit) [Yes] y

Add addresses to an IP Address pool using the ADD IP-POOL command

under FEATURE DIALs in the configuration console (talk 6).

13. The previous question enables the device to provide an IP address from the

IP address pool for the client to use for the duration of the connection. IP

address pools enable the device to provide an IP address from the IP address

pools to the client to use for the duration of the connection.

Assign address using proxy DHCP? (Yes, No, Quit) [No] y

How many DHCP Servers do you wish to use? (Maximum is 20) : (1) 2

Enter DHCP Server Address: [] 10.0.0.1

Enter DHCP Server Address: [] 10.0.0.2

660MRS V3.2 Software User's Guide