IBM SC30-3681-08 manual Conguring, Conguration Commands Summary

Con®guring V.34

Table 77. V.34 Con®guration Commands Summary

Command	Function
? (Help)	Displays all the commands available for this command level or lists the
	options for speci®c commands (if available). See ªGetting Helpº on page 10.
List	Displays the V.34 con®guration.
Set	Sets the local address, connect, disconnect, and no answer timeouts,
	number of retries after no answer, and command delay timeout.
Exit	Returns you to the previous command level. See ªExiting a Lower Level
	Environmentº on page 11.

List

Use the list command to display the current V.34 con®guration.

Syntax: list

Example: list

V.34 System Net Configuration:

Local Network Address Name	= v403
Local Network Address	= 1-508-898-2403
Non-Responding addresses:
Retries	= 1
Timeout	= 0	seconds
Call timeouts:
Command Delay	= 0	ms
Connect	= 60 seconds
Disconnect	= 2	seconds
Modem strings:
Initialization string	= at&f&s1l1&d2&c1x3
Speed (bps)	= 115200

Local Network Address Name:

Displays the network address name of the local port.

Local Network Address:

Displays the network dial address of the local port.

Non-responding addresses:

Retries

Maximum number of calls the router attempts to make to a non-responding address during the timeout period.

Timeout

If the router reaches the maximum number of retries to a non-responding address, it does not attempt to establish the call until this time has expired. This timeout period begins when the router attempts the ®rst call.

Call timeouts:

Number of call timeouts.

Command Delay

Amount of time, in milliseconds, that the router waits to initiate or answer a call after it turns on DTR (Data Terminal Ready). If you

600MRS V3.2 Software User's Guide