Agilent Technologies L4400 manual L4433A Scpi Command Summary

L4433A Dual/Quad 4x8 Reed Matrix 5

L4433A SCPI Command Summary

Table 5-1 lists the instrument-specific SCPI commands that apply to the L4433A Dual/Quad 4x8 Reed Matrix. Table 3-3 (Chapter 3) lists the SCPI commands that apply to all L4400 series instruments.

For complete information on all SCPI commands, refer to the Programmer’s Reference contained on the L4400 Product Reference CD-ROM (p/n 34989-13601).

Table 5-1. L4433A SCPI Command Summary

Subsystem	Commands
ROUTe	ROUTe:CHANnel:LABel:CLEar:MODule 1
(Switch Control)	ROUTe:CHANnel:LABel[:DEFine] "<label>" , (@<ch_list>)
	ROUTe:CHANnel:LABel[:DEFine]? [{USERFACTory},]
	(@<ch_list>)
	ROUTe:CLOSe (@<ch_list>)
	ROUTe:CLOSe? (@<ch_list>)
	ROUTe:CLOSe:EXCLusive (@<ch_list>)
	ROUTe:MODule:BUSY? 1
	ROUTe:MODule:WAIT 1
	ROUTe:MODule:WAIT? 1
	ROUTe:OPEN (@<ch_list>)
	ROUTe:OPEN? (@<ch_list>)
	ROUTe:OPEN:ABUS {1-4ABUS1-ABUS4ALL}
	ROUTe:OPEN:ALL 1
	ROUTe[:OPERation]:OVERlap[:ENABle] {OFF0ON1}
	ROUTe[:OPERation]:OVERlap[:ENABle]?
ROUTe	ROUTe:SEQuence:ABORt
(Sequence	ROUTe:SEQuence:BUSY?
Operation)	ROUTe:SEQuence:CATalog?
	ROUTe:SEQuence:DEFine <name>, "<commands>"
	ROUTe:SEQuence:DEFine? <name>
	ROUTe:SEQuence:DELete:ALL
	ROUTe:SEQuence:DELete[:NAME] <name>
	ROUTe:SEQuence:RUNNing:NAME?
	ROUTe:SEQuence:TRIGger[:IMMediate] <name>
	ROUTe:SEQuence:TRIGger:SOURce <name>, MANual
	ROUTe:SEQuence:TRIGger:SOURce? <name>
	ROUTe:SEQuence:WAIT
SYSTem	SYSTem:MODule:WIRE:MODE {WIRE1WIRE2}, 1
	SYSTem:ABUS:INTerlock:SIMulate {OFF0ON1}
	SYSTem:ABUS:INTerlock:SIMulate?
DIAGnostic	DIAGnostic:RELay:CYCLes? (@<ch_list>)
	DIAGnostic:RELay:CYCLes:CLEar (@<ch_list>)

L4400 User’s Guide 113