3Operating and Programming

Scan List

 

 

 

 

 

 

 

 

 

 

t

Ch 1

Ch 2

Ch 3

Ch 4

Ch 5

Ch 6

 

 

 

 

 

t

t1

t2

t3

t4

t5

t6

Channel Delay

 

 

 

 

(0 to 60 seconds)

 

 

 

 

Figure 3-12. Channel Delay.

You can set the channel delay to any value between 0 seconds and

60 seconds, with 1 ms resolution. You can select a different delay for each channel.

You can select a unique delay for every channel on the module.

The channel delay is valid only while scanning. If no channels have been assigned to the scan list, the specified channel delay is ignored (no error is generated).

The default channel delay is 0.0 seconds.

A Factory Reset (*RST command) sets the channel delay to 0.0s.

The following command adds a 2- second channel delay to the specified channels.

ROUT:CHAN:DELAY 2,(@1003,1013)

78

L4400 User’s Guide

Page 88
Image 88
Agilent Technologies L4400 manual Channel Delay