2Software Installation and Configuration

Figure 2-24. Instrument Firmware Update Complete.

5.Once the carrier update AND instrument sub- assembly update (if one occurs) complete and no instrument activity is indicated by the front panel LEDs, cycle power on the instrument. Once the power- on sequence completes, select ‘Refresh All’ in the Agilent Connection Expert (Figure 2- 10).

Agilent Connection Expert may report that the instrument’s configuration has changed. This is represented by a yellow triangle and an exclamation point (!) next to the updated instrument. Select (highlight) the instrument name. Select ‘Change Properties...’ and then click either ‘Test Connection’ or ‘Identify Instrument’ to update Agilent Connection Expert and then click ‘OK’. Repeat for each updated instrument on the LAN and GPIB interfaces.

44

L4400 User’s Guide

Page 54
Image 54
Agilent Technologies L4400 manual Instrument Firmware Update Complete