Agilent Technologies L4400 manual L4437A Scpi Command Summary

6L4437A General Purpose Switch

L4437A SCPI Command Summary

Table 6-1 lists the instrument-specific SCPI commands that apply to the L4437A General Purpose Switch Instrument. Table 3-3 (Chapter 3) lists the SCPI commands that apply to all L4400 series instruments.

For complete information on all SCPI commands, refer to the Programmer’s Reference contained on the L4400 Product Reference CD-ROM (p/n 34989-13601).

Table 6-1. L4437A SCPI Command Summary.

Subsystem	Commands
ROUTe	ROUTe:CHANnel:LABel:CLEar:MODule 1
(Switch Control)	ROUTe:CHANnel:LABel[:DEFine] "<label>" , (@<ch_list>)
	ROUTe:CHANnel:LABel[:DEFine]? [{USERFACTory},]
	(@<ch_list>)"
	ROUTe:CLOSe (@<ch_list>)
	ROUTe:CLOSe? (@<ch_list>)
	ROUTe:CLOSe:EXCLusive (@<ch_list>)
	ROUTe:MODule:BUSY? 1
	ROUTe:MODule:WAIT 1
	ROUTe:MODule:WAIT? 1
	ROUTe:OPEN (@<ch_list>)
	ROUTe:OPEN? (@<ch_list>)
	ROUTe:OPEN:ALL 1
	ROUTe[:OPERation]:OVERlap[:ENABle] {OFF0ON1}
	ROUTe[:OPERation]:OVERlap[:ENABle]?
ROUTe	ROUTe:SEQuence:ABORt
(Sequence	ROUTe:SEQuence:BUSY?
Operation)	ROUTe:SEQuence:CATalog?
	ROUTe:SEQuence:DEFine <name>, "<commands>"
	ROUTe:SEQuence:DEFine? <name>
	ROUTe:SEQuence:DELete:ALL
	ROUTe:SEQuence:DELete[:NAME] <name>
	ROUTe:SEQuence:RUNNing:NAME?
	ROUTe:SEQuence:TRIGger[:IMMediate] <name>
	ROUTe:SEQuence:TRIGger:SOURce <name>, MANual
	ROUTe:SEQuence:TRIGger:SOURce? <name>
	ROUTe:SEQuence:WAIT
DIAGnostic	DIAGnostic:RELay:CYCLes? (@<ch_list>)
	DIAGnostic:RELay:CYCLes:CLEar (@<ch_list>)
SYSTem	SYSTem:MODule:PFAil:JUMPer:AMP5? 1
	SYSTem:MODule:TEMPerature? [{TRANsducerTTHReshold}], 1

130 L4400 User’s Guide