Agilent Technologies L4400 manual Defining a Sequence, L4421A / L4433A, L4437A

3	Operating and Programming
		Sequence Management
		ROUTe:SEQuence:CATalog?	Returns list of defined sequence names.
		ROUTe:SEQuence:DELete:ALL	Deletes all sequences from memory.
		ROUTe:SEQuence:DELete[:NAME] <name>	Deletes specified sequence from memory.
		Alarm Limits
		OUTPut:ALARm{1-2}:SEQuence?	Returns sequence associated with alarm.
		ROUTe:SEQuence:TRIGger:SOURce <name>, <source>	Assigns trigger source to sequence.
		ROUTe:SEQuence:TRIGger:SOURce? <name>	Returns trigger source currently selected.

Defining a Sequence

A sequence defines a series of SCPI commands with an associated name. When the sequence is first defined, the commands are compiled and then stored in a compressed format in non- volatile memory. The following SCPI commands by L4400 LXI instrument are allowed in a sequence definition (all other commands will generate an error).

L4421A / L4433A

ROUTe:ClOSe (@<ch_list>)

ROUTe:CLOSe:EXCLusive (@<ch_list>)

ROUTe:OPEN (@<ch_list>)

ROUTe:OPEN:ABUS [{1-4ABUS1-ABUS4ALL}]

ROUTe:OPEN:ALL [{1ALL}]

ROUTe:MODule:WAIT {1ALL}

ROUTe:SEQuence:TRIGger[:IMMediate] <name>

SYSTem:DELay[:IMMediate] <time>

ABORt

L4437A

ROUTe:ClOSe (@<ch_list>)

ROUTe:CLOSe:EXCLusive (@<ch_list>)

ROUTe:OPEN (@<ch_list>)

ROUTe:OPEN:ALL [{1ALL}]

ROUTe:MODule:WAIT {1ALL}

ROUTe:SEQuence:TRIGger[:IMMediate] <name>

SYSTem:DELay[:IMMediate] <time>

ABORt

90 L4400 User’s Guide