Agilent Technologies L4400 manual Verifying the new Gpib Path

Software Installation and Configuration 2

From the Agilent Connection Expert main window, highlight the instrument added and then click ‘Change Properties ...”. Within the configurable properties window, change the address of the instrument from ‘9’ to ‘10’ and click ‘OK’.

Highlight instrument and select, change address to ‘10’.

Figure 2-20. Changing the GPIB Address within Configuration Expert.

Verifying the new GPIB Path

To verify the GPIB address change, you can close the Interactive IO window, select the instrument, and reopen Interactive IO. Or, with Interactive IO remaining open, select ‘Connect’ and change the address from ‘9’ to ‘10’. Once connected to GPIB address

L4400 User’s Guide 37