Speco Technologies DVR-16TN, DVR-4TN Export Configuration, Copy Destination, Configuration Name

User’s Manual

NOTE: If the imported configuration has a different record mode from the unit’s, the warning message “This config has different record mode. This will FORMAT ALL HARDDISKS.” will show.

NOTE: Remove the ThumbDrive® used for importing configuration after the unit restarts, or it will be formatted as well.

5.8.3Export Configuration

The Administrator is allowed to save a unit configuration by exporting it to an external drive, such as a USB Flash Drive. Before exporting the configuration, make sure the device in which the configuration will be saved is attached to the unit properly. Select <Export Config> from the Configuration menu and press ENTER. The following menu is displayed.

Export Config

1.Copy Destination

2.Config Name

3. Begin Export NO

Items in this menu are described in the following sections.

5.8.3.1Copy Destination

Select this item to list available destinations (external memory devices) to which the configuration can be exported. Press UP / DOWN to set a destination. Please note that saving a different configuration to the same copy destination with the same file name will overwrite the previous configuration file without warning.

NOTE: Users are not allowed to select any CD-R/W or DVD+RW as a copy destination, including built-in CD-R/W and DVD+RW.

5.8.3.2Configuration Name

This item allows the user to assign the exported configuration file a name. Use the virtual keyboard to enter the configuration file name.

Note that the file name can contain up to 15 characters, with no spaces.

DVR-4TN/8TN/16TN/ 16TS/16TT Series	97
SPECO TECHNOLOGIES 01/06