Speco Technologies DVR-16TN, DVR-4TN, DVR-8TN, DVR-16TS Admin / User Passwords, Enable Password

User’s Manual

5.1.5Password

The Password menu allows administrator to change the password settings for accessing the unit. Select <Password> in the System Setup menu and press ENTER; the menu displays as follows. Three account/password are offered for setting.

Password

1.Admin1 Password

2.User1 Password

3.Admin2 Password

4.User2 Password

5.Adimin3 Password

6.User3 Password

7.	Enable Password	No
8.	Load Factory Password	None

5.1.5.1Admin / User Password(s)

Only who entering with the administrator password is allowed to change the user and administrator passwords (to any 4~8 digit number). Use the UP / DOWN Direction keys to enter the desired account and press ENTER, the following menu is displayed.

Admin Password

________

Press Channel Keys To Enter Password

(4-8 Digits)

Press ◄ To Delete

Use CHANNEL keys to input the new password and confirm the new password. After setting the new password, press ENTER to save the settings and exit.

5.1.5.2Enable Password

This item is used to determine if a password is required for accessing the OSD menu. Select <YES> to demand entering password when accessing the OSD menu; if not, select <NO>.

DVR-4TN/8TN/16TN/ 16TS/16TT Series	57
SPECO TECHNOLOGIES 01/06