User’s Manual
In the Network Setup menu, select <Dial-out Setup> and press ENTER to enter the Dial-out menu. The menu displays as follows.
| | Dial-out Setup | | | |
1. | Dial-out DHCP | | | OFF |
2. | Dial-out IP | 0. | 0. | 0. | 0 |
3. | Dial-out Netmask | 0. | 0. | 0. | 0 |
4. | Dial-out Gateway | 0. | 0. | 0. | 0 |
5. | Dial-out DNS | 0. | 0. | 0. | 0 |
6. Phone Number | | | | |
7. | Dial-out Account | | | | |
8. | Dial-out Password | | | | |
9. | Dial-out Idle Time | | | 0 Min |
10. Dial-out Max Time | | | 0 Min |
11. | Connect | | | | No |
-Dial-out DHCP
This item allows the user to obtain a dynamic IP address from a DHCP (Dynamic Host Configuration Protocol) server over a modem connection. If the item is enabled (ON), a dynamic IP will be assigned to the DVR-4TN/8TN/16TN/16TS/16TTseries unit. In this case, the user does not need to configure a static IP and the following settings will be “read only.”
Select <ON> to enable the DHCP function, or <OFF> to set the dial-out IP address, Netmask, Gateway and DNS manually. The default setting is <ON>.
-Dial-out IP
This item is for setting a static IP address that identifies the DVR-4TN/DVR-8TN/DVR-16TNseries unit over a modem connection. Set the <Dial-out DHCP> to <OFF> for accessing this item.
Move the cursor over <Dial-out IP> and press ENTER, then press UP / DOWN keys to change the values in the selected field.
66 | DVR-4TN/8TN/16TN/16TS/16TT Series |
| SPECO TECHNOLOGIES 01/06 |
