User’s Manual

Connecting Short-term Device

If you plan to install any short-term external devices, such as USB CD-RW, USB Hard Disk Drive, etc, to the DVR-4TN/8TN/16TN/16TS/16TTseries and want to use them as part of the unit system. Make sure those devices are

connected only after the DVR-4TN/8TN/16TN/16TS/16TT is powered up.

The DVR-4TN/8TN/16TN/16TS/16TTseries unit can only recognize the external devices after the power-up process is completed.

2.4Rear Panel Connections

There are several connectors on the rear panel of the DVR-4TN/8TN/16TN/16TS/16TTseries units available for installations. The following figure shows the connectors by name and a detailed description of each connector follows.

There is one difference between the rear panel of different models; DVR-4TN/8TN/16TNhas an IEEE 1394 connector and DVR-16TS/TThas a 1000M LAN Port instead, shown as below figures.

Rear Panel of DVR-4TN/8TN/16TN:

14

DVR-4TN/8TN/16TN/16TS/16TT Series

 

SPECO TECHNOLOGIES 01/06

Page 15
Image 15
Speco Technologies DVR-8TN manual Rear Panel Connections, Connecting Short-term Device, Rear Panel of DVR-4TN/8TN/16TN