User’s Manual
5.4.1Record Mode
This item is for you to preset the resolution and recording rate of normal record and event record. The relative record settings, such as uration, will follow the record mode setting. The offered options are <720×480@30PPS>, <720 × 240@60PPS> and <360 × 240@120PPS> in NTSC (<720 × 576@25PPS>, <720×288@50PPS>, <360×288@100PPS>in PAL).
Move the cursor to this item and press ENTER, then select a Record mode using UP / DOWN keys.
NOTE: After changing the Record Mode setting, the warning message “This will FORMAT ALL HARD DISKS and LOAD THE FACTORY DEFAULT CONFIG!” will be shown on the screen. Press ENTER to confirm the selection, then the unit will start to format the hard disks and load the factory default settings, or press ESC to abort.
We strongly recommend backing up your programmed configuration before making any changes on Record Mode settings.
5.4.2Schedule Setup
This submenu is used to set the day and night time, or weekend recording schedule.
The Night and Day schedules are used to define daytime and nighttime; the Weekend schedule is tailored for weekends and holidays.
Select <Schedule Setup> from the Record Setup menu and press ENTER; the following menu is displayed.
|
| Schedule Setup |
1. | Day Time Start | 06:00 |
2. | Day Time End | 18:00 |
3. | Night Time Start | 18:00 |
4. | Night Time End | 06:00 |
5. Weekend Schedule | YES | |
6. | Weekend Start | Fri 18:00 |
7. | Weekend End | Mon 06:00 |
82 |
|
| SPECO TECHNOLOGIES 01/06 |
