
User’s Manual
4.6.6Calling Preset Points
Follow these steps to call preset points.
•Press a Channel key to view the corresponding camera in full screen.
•Then press DOME to enter dome control mode.
•Press 2 to view the dome control Hint Screen; press 2 again to toggle the Hint Screen.
•Press 1 to access the Set/Go Preset function.
| Dome Preset |
|
Index | Set Preset | Go Preset |
1 | NO | NO |
2 | NO | NO |
3 | NO | NO |
4 | NO | NO |
5 | NO | NO |
6 | NO | NO |
7 | NO | NO |
8 | NO | NO |
9 | NO | NO |
•Use UP / DOWN keys to select the desired preset number from the menu.
•Change the <Go Preset> of the selected preset number to <YES>, and press ENTER to call the preset point.
•Now the selected dome camera rotates to the preset position automatically.
5.Advanced System Configuration
The detailed functions and settings of the
To enter the Main menu, press MENU and then enter Administrator or User password. The default passwords are shown in the following table. The same default passwords are used for entering the remote viewing software SpecoRemoteTM.
Administrator Password | User Password |
1234
4321
It is strongly recommended to change the passwords to prevent unauthorized access to the unit.
49 | |
SPECO TECHNOLOGIES 01/06 |
|