User’s Manual
5.3Camera Setup
The items in the Camera Setup menu enable the user to set camera parameters, including camera title, dome protocol and ID for each connected camera. The menu is shown below..
|
| Camera Setup |
1. | Camera Select | CH1 |
2. | Dome Protocol | None |
3. Dome ID | 0 | |
4. | Camera Title | CH1 |
5. | Covert | No |
6. Termination | Yes | |
7. | Brightness | 0 |
8. | Contrast | 0 |
9. | Saturation | 0 |
10. Hue | 0 | |
11. Audio Association | Both | |
Items in this menu are described in the following subsections.
5.3.1Camera Select
This item is used to select a camera for setting parameters. The settings can then be set for the related camera, such as dome protocol and camera title.
Move the cursor to <Camera Select> and press ENTER, then select a channel using UP / DOWN keys.
5.3.2Dome Protocol
Select the communications protocol associated with your dome camera using the ENTER and Direction keys. The available protocol includes <DynaColor>, <Pelco D>, <Pelco P>, <AD422>，<Fastrax 2> and <None> (default).
5.3.3Dome ID
This item is used to assign an ID number to the selected dome camera. Note that ID number must match the ID address set by the dome.
78 |
|
| SPECO TECHNOLOGIES 01/06 |
