Speco Technologies DVR-8TN, DVR-4TN, DVR-16TS, DVR-16TN Event Setup, Internal Buzzer, Event Icon

User’s Manual

A sequence can have up to 16 entries. The user can select fewer than 16 entries for a camera sequence and leave the remaining entries blank. The sequence can include a specific camera or cameras multiple times.

5.6Event Setup

This menu allows the user to determine DVR-4TN/8TN/16TN/16TS/16TTseries behavior in response to an alarm event. In the Main menu, move the cursor to <Event Setup> and press ENTER. The following menu is displayed.

		Event Setup
1.	Internal Buzzer	ON
2.	Event Icon	ON
3.	Email Notice	OFF
4.	Event Full Screen
5.	Event Duration
6.	Per Channel Config

Items in the Event Setup menu are described in the following subsections.

5.6.1Internal Buzzer

This item allows user to enable / disable the DVR-4TN/DVR-8TN/DVR-16TNseries internal buzzer. If set to <ON>, the buzzer is activated in response to an alarm. If set to <OFF>, the buzzer is not activated. The default setting is <ON>.

5.6.2Event Icon

This item enables (ON) / disables (OFF) the display of an Event Icon on the main monitor when an alarm event occurs. The default setting is <ON> (enable).

The event types are represented by a character respectively; the descriptions are listed in the table below.

Event type Description

AAlarm in event

MMotion detection event

LVideo loss event

90	DVR-4TN/8TN/16TN/16TS/16TT Series
	SPECO TECHNOLOGIES 01/06