User’s Manual

4.6.2Dome Protocol Setup

The Dome Protocol menu item lists the dome protocols available for communicating with dome cameras connected to the DVR-4TN/8TN/16TN/16TS/16TTseries unit. From the Main menu, select <Camera Setup> and press ENTER. The following menu is displayed.

 

 

Camera Setup

1.

Camera Select

CH1

2.

Dome Protocol

None

3. Dome ID

0

4.

Camera Title

 

5.

Covert

NO

6. Termination

NO

7.

Brightness

0

8.

Contrast

0

9.

Saturation

0

10. Hue

0

11. Audio Association

Both

To configure dome protocol, first select a camera then set the communications protocol associated with that dome camera using the Direction keys and press ENTER. The available protocols include <Speco>, <Pelco D>, <Pelco P>, <AD422>, <Fastrax 2> and <None> (default).

NOTE: The settings become effective after saving the changes and exiting from the menu.

4.6.3RS485 Setup

The DVR-4TN/8TN/16TN/16TS/16TTseries unit controls the domes via RS-485 communication protocol. The RS-485 parameters in the DVR-4TN/8TN/16TN/16TS/16TTseries unit must be set to the same parameters as the protocol used in the RS-422 setup for the dome.

DVR-4TN/8TN/16TN/ 16TS/16TT Series

45

SPECO TECHNOLOGIES 01/06

 

Page 46
Image 46
Speco Technologies DVR-8TN, DVR-4TN, DVR-16TS, DVR-16TN, DVR-16TT manual Dome Protocol Setup, 3 RS485 Setup