
User’s Manual
If the DHCP is enabled (ON), a dynamic IP will be assigned to the
If you are using permanent addressing, set DHCP to <OFF> for setting the IP Address, Netmask, Gateway, and DNS. See your network system administrator or IT personnel for appropriate values for these setting.
-IP
This item is used to configure the IP (Internet Protocol) address of the unit. The IP address is the identifier for your computer or device on a TCP/IP LAN or WAN. Please note that to set a static IP address, DHCP must be set to <OFF>.
-Netmask
A netmask is a
This item allows the user to enter the value of the Netmask for the unit. Please note that to configure the item, DHCP must be set to <OFF>.
-Gateway
A Gateway is a node on a network that serves as an entrance to another network.
Users are allowed to specify the IP address of the gateway or router associated with this unit. To configure this item, DHCP must be set to <OFF>.
60 |
|
| SPECO TECHNOLOGIES 01/06 |