Speco Technologies DVR-16TT, DVR-4TN, DVR-8TN, DVR-16TS, DVR-16TN manual Setting Preset Points

User’s Manual

4.6.5Setting Preset Points

The DVR-4TN/8TN/16TN/16TS/16TTseries unit allows user to set preset positions; the amount of preset points allowed depends on the dome manufacturer.

Follow these steps to set preset points..

•Press a Channel key to view the corresponding camera in full screen.

•Then press DOME to enter dome control mode.

•Use Direction keys to position the dome camera to desired position.

•Press 2 to view the dome control Hint Screen; press 2 again to toggle the Hint Screen.

Hint Screen

DOME / ESC: Exit

MODE / PLAY: Iris Open / Close

SEQ / FREEZE: Focus Near / Far

MENU / SEARCH: Zoom In / Out

ENTER: Auto Focus / Iris

◄▲▼►: Pan / Tilt

CH1: Set / Go Preset

CH2: Hint Screen On / Off

Dome Control

•Press 1 to access the Set/Go Preset function. The Dome Preset menu is then displayed.

	Dome Preset
Index	Set Preset	Go Preset
1	NO	NO
2	NO	NO
3	NO	NO
4	NO	NO
5	NO	NO
6	NO	NO
7	NO	NO
8	NO	NO
9	NO	NO

•Use UP / DOWN keys to select the desired preset number from the menu.

•Change the <Set Preset> of the selected preset number to <YES>, and press ENTER to save the position. Now the preset is set and ready to call.

48	DVR-4TN/8TN/16TN/16TS/16TT Series
	SPECO TECHNOLOGIES 01/06