Speco Technologies DVR-4TN, DVR-8TN Ddns Port, Submit/Update, 7 RS485 Setup, Unit ID, Baud Rate

User’s Manual

NOTE: No any two DVR-4TN/ DVR-8TN/ DVR-16TN series units should be set the same Host Name.

-DDNS Port

This item allows the user to setup the port for DDNS. Press UP / DOWN Direction keys to change the port.

-Submit/Update

When done, move the cursor to this item and press ENTER to submit the settings.

NOTE: If there are two DVR-4TN/ DVR-8TN/ DVR-16TN series units set with the same domain name, the later setting will not be submit successfully.

5.1.7RS485 Setup

This menu allows the user to setup the parameters of the unit’s RS-485 communications port. From the Main menu, select <RS485 Setup> and press ENTER. The following menu is displayed.

		RS485 Setup
1.	Unit ID	224
2.	Baud Rate	9600
3.	Bits	8
4.	Stop	1
5.	Parity	None

5.1.7.1Unit ID

This item is used to change the RS-485 ID address of the unit. The ID is with the range of <1> to <255>. The default is <224>.

5.1.7.2Baud Rate

The Baud rate options for association with the protocol are <2400>, <4800>, <9600>, <19200>, <38400> and <57600>. The default is <9600> baud.

74	DVR-4TN/8TN/16TN/16TS/16TT Series
	SPECO TECHNOLOGIES 01/06