Speco Technologies DVR-16TT Power Up / Down the Unit, To Power Up the Unit, Power Off, Reboot

User’s Manual

3.3Power Up / Down the Unit

If you must shut down the DVR-4TN/8TN/16TN/16TS/16TTseries unit for any reason, use the proper shut down and power up procedures to avoid damage to your DVR unit..

To Power Up the Unit

First check the type of power source available is compatible before plugging in your DVR and turn on the unit using the power switch on the rear panel.

The color bar and system checking information will be shown on the monitor and disappear when the unit has been completely powered up.

To Restart / Shutdown the Unit

Press MENU and input the administrator password to access the OSD Main menu. Select <Shutdown> in Main Menu and press ENTER to enter the Shutdown menu, which displays as follows.

		Shutdown
1.	Power Off	Execute
2.	Reboot	Execute

<Power Off>

Select this item to shut down the unit. Do not disconnect the power during shut down until the message “You can safely turn off DVR now!” displays.

<Reboot>

Select this item to reboot the unit. The color bar and system checking information are displayed on the monitor until the unit is completely restarted.

DVR-4TN/8TN/16TN/ 16TS/16TT Series	23
SPECO TECHNOLOGIES 01/06