Speco Technologies DVR-4TN, DVR-8TN, DVR-16TS, DVR-16TN, DVR-16TT manual Dial-in Password, Server IP

User’s Manual

•Use Direction keys to move the cursor to the desired character.

•Press ENTER to add the selected character to the username entry field.

•When done, move the cursor to <OK> and press ENTER to save the settings and exit.

NOTE: The Server IP and the Client IP must not be identified as the same IP address; but they have to be set in the same domain.

For example: Server IP: 192.168.0.1 Client IP: 192.168.0.2

-Dial-in Password

This item allows the user to setup the Dial-in password. Follow these steps to setup the login password.

•Select <Dial-in password> from Dial-in Setup menu and press ENTER. A virtual keyboard displays.

•Use Direction keys to select character.

•Press ENTER to add the selected character to the password entry field.

•When done, move the cursor to <OK> and press ENTER to save the settings and exit.

-Server IP

This item is for setting the IP address that identifies the DVR-4TN/8TN/16TN/16TS/16TTseries unit over a modem connection. To set the server IP, follow these steps:

•Select <Server IP>.

•Using LEFT/ RIGHT to move the cursor over the IP, and stop where you want to make the change.

•Press ENTER, and then use UP/ DOWN to change the value.

•When done, press ENTER again to exit.

•Repeat the procedure until the IP is completely set.

64	DVR-4TN/8TN/16TN/16TS/16TT Series
	SPECO TECHNOLOGIES 01/06