Speco Technologies DVR-16TS Email Notice, Event Full Screen, Event Duration, Per Channel Config

User’s Manual

5.6.3Email Notice

The item enables (ON) / disables (OFF) the Email notification of an event. When an alarm event is triggered and <Email Notice> is enabled, an e-mail concerning the alarm event will be sent. The default setting is <OFF>.

NOTE: In order to send an event notification e-mail successfully, ensure that the unit connects to the Internet.

5.6.4Event Full Screen

This function allows the unit to display the alarm channel in full screen size when an alarm is triggered.

Select <None> to enable this function; select <Main> to display the alarm channel on Main Monitor when an alarm is triggered; select <Call> to display the alarm channel on Call Monitor; and select <Both> to display the alarm channel on both Main Monitor and Call Monitor.

5.6.5Event Duration

This item determines the duration of the buzzer and Alarm Out relay function after an alarm is triggered. The available event duration range is from 5 second to 999 seconds. The default setting is 5 seconds.

5.6.6Per Channel Config

This menu is used to set the Video Loss Detect, Motion Detect and Alarm In / Out function for each channel. The menu is displayed as below.

		Per Channel Config
1.	Channel Select	CH1
2.	Video Loss Detect	OFF
3.	Motion Detect	OFF
4.	Detection Config	OFF
5. Alarm In
6. Alarm Out		None

DVR-4TN/8TN/16TN/ 16TS/16TT Series	91
SPECO TECHNOLOGIES 01/06