Speco Technologies DVR-16TN Channel Select, Video Loss Detect, Motion Detect, Detection Config

User’s Manual

5.6.6.1Channel Select

This item is used to select a desired channel for setting the parameters. Move the cursor to <Channel Select> and press ENTER, then select a channel using UP / DOWN keys. Press ENTER again to confirm the setting.

5.6.6.2Video Loss Detect

This item allows the user to enable / disable Video Loss as an alarm event. Select <ON> to enable Video Loss alarm events, <OFF> to disable. The default setting is <OFF>.

5.6.6.3Motion Detect

Use to enable or disable the motion detection function of the DVR-4TN/8TN/16TN/16TS/16TTseries unit. By default, the value is <OFF>.

If the motion detection function is enabled, it is required to define the motion detection parameters such as detection area and sensitivity settings.

5.6.6.4Detection Config

If motion detection function is enabled, it is required to define the motion detection parameters such as detection area and sensitivity settings. Select a channel for setting the parameters, move the cursor to <Detection Config>, and press ENTER. The Detection Configuration menu displays as follows.

	Detection Config
1.	Detected Area Setup	88%
2.	Sensitivity
3. Area Threshold		6%

----- Detected Area Percentage -----

40%

▲

92	DVR-4TN/8TN/16TN/16TS/16TT Series
	SPECO TECHNOLOGIES 01/06