Speco Technologies DVR-4TN, DVR-8TN, DVR-16TS, DVR-16TN, DVR-16TT manual LAN Select, LAN Setup

User’s Manual

5.1.6.1LAN Select

PPPoE stands for Point-to-Point Protocol over Ethernet, which is a specification for connecting the users by Ethernet to the Internet through a common broadband medium.

This item allows you to select your service type between <LAN>, <PPPoE> or <None>; if you are using an intranet for communication, please select <LAN>, if you are using a broadband medium, such as DSL Line or cable modem, please select <PPPoE>.

If <None> is selected, then there is no need to set further LAN setting, therefore, the second item <LAN Setup> will not be accessible.

5.1.6.2LAN Setup

The network related settings in the LAN Setup menu should be associated with the network service type. If you select <LAN> for <LAN Select>, then 6th to 8th item will not be available.

Select <LAN Setup> in Network Setup menu and press ENTER for setting the parameters; the menu displays as follows.

		LAN Setup
1. DHCP		OFF
2.	IP	192.168.1.150
3.	Netmask	255.255.255.0
4.	Gateway	192.168.1.1
5.	DNS	0.0.0.0
6.	PPPoE Account
7. PPPoE Password		35min
8.	PPPoE Max Idle
9.	Connect At Booting	YES
10. Network Restart		NO

-DHCP

This item allows the user to obtain a dynamic IP address from a DHCP (Dynamic Host Configuration Protocol) server while the unit boots up. When using DHCP, the settings are dynamic and they will change every time you power up and power off the unit, depending on your network's setup.

DVR-4TN/8TN/16TN/ 16TS/16TT Series	59
SPECO TECHNOLOGIES 01/06