User’s Manual

4.6Dome Control

The DVR-4TN/8TN/16TN/16TS/16TTseries unit allows the user to control a dome camera at the front panel.

In Live mode, the user can press the CHANNEL key to display the appropriate dome camera in full view. To enter Dome Control mode, press the DOME key and press channel key 2 to display the hint screen. To exit the Dome Control mode and go back to live mode, press ESC or DOME. To configure the dome control settings, see the following sections.

4.6.1Dome Connection

Follow the steps below to install a dome camera.

See section 2.4 Rear Panel Connections for RS-485 port pin definition.

Using a RS-485 cable, connect the R+, R- terminals from the dome camera to the D+, D- terminals on the RS-485 port respectively. Refer to the following illustration.

44

DVR-4TN/8TN/16TN/16TS/16TT Series

 

SPECO TECHNOLOGIES 01/06

Page 45
Image 45
Speco Technologies DVR-4TN, DVR-8TN, DVR-16TS, DVR-16TN, DVR-16TT manual Dome Control, Dome Connection