Agilent Technologies L4400 manual Adding and Configuring the Instruments

2Software Installation and Configuration

Clicking on “Find Instruments” (Figure 2- 8) opens the search window. Clicking on “Find Now” performs the search for instruments on the LAN network. Instruments found (discovered) on the network (local subnet) are indicated as shown. In the Figure 2- 8 example, two instruments were located on the router subnet.

Figure 2-8. L4400 Instrument Private LAN Connection.

NOTE	The “Find Instrument” function of Agilent Connection Expert is supported
	only on computers that have a single LAN card installed. If your computer
	has more than one LAN card, the L4400 instruments must be entered
	“manually” using the IP addresses.

Adding and Configuring the Instruments

To add an instrument to the network configuration, select (highlight) the instrument host name/IP address and click on ‘OK’ in the “Search for Instru- ments on the LAN” window. This opens the “LAN Instrument” window shown in Figure 2- 9.

24 L4400 User’s Guide