Agilent Technologies L4400 34933T-002 Terminal Block for One-Wire Mode, for further information

5L4433A Dual/Quad 4x8 Reed Matrix

34933T-002 Terminal Block for One-Wire Mode

This terminal block with screw- type connections is labeled with the model number and the abbreviated module name.

N O TE	All modules that connect to the analog bus are interlock protected.
	This means that when an installed module is exposed (no terminal
	block or cable is connected), the analog bus relays and current
	channels are open and disconnected from the analog buses. See
	page 112 for further information.

N O TE

If you are using an Agilent terminal block to connect your DUT to this module be sure to use the 34933T-002 terminal block that corresponds to the 1-wire configuration mode. Note that an error will not be generated if you have installed a terminal block that doesn't match the present module configuration.

NOTE: Analog Bus connections are on Matrix 3 and Matrix 4.

Warning -the insulation of the wiring used with the terminal block must be rated for the highest voltage that will be present on the terminal block or on the analog bus.

126 L4400 User’s Guide