Agilent Technologies L4400 manual Y1152A Switch Control, Conductor Cable

Microwave Switch/Attenuator Driver 7

16 Conductor Cable

Item	Description	Example Part Numbers
Cable Type	16 conductor ribbon cable, 0.050" pitch, 26 or	3M	3801/16 (26 AWG)
	28 AWG stranded	3M	3365/16 (28 AWG)
Y1152A Connector	10 pin socket connector, 0.1" x 0.1" pin grid,	3M	P/N 89116-0101
	IDC termination, center polarizing key	AMP P/N 76288-3
Switch Connector	16 pin socket connector, 0.1" x 0.1" pin grid,	3M	P/N 89116-0101
	IDC termination, center polarizing key	AMP P/N 76288-3
Cable Wiring	Y1152A connector pin 1 to switch connector
	pin 1

9 Conductor Cable

Item	Description	Example Part Numbers
Cable Type	9 conductor ribbon cable, 0.050" pitch, 26 or	3M	3801/09 (26 AWG)
	28 AWG stranded	3M	3365/09 (28 AWG)
Y1150A Connector	10 pin socket connector, 0.1" x 0.1" pin grid,	3M	P/N 89110-0101
	IDC termination, center polarizing key	AMP P/N 76288-1
Switch Connector	9 pin D-sub male, IDC termination, without	3M	P/N 8209-6000
	threaded insert	AMP P/N 747306-4
Cable Wiring	Y1152A socket connector pin 1 to switch
	D-sub connector pin 1
	(Note: pin 10 of Y1152A connector not used)

Y1152A Switch Control

All channels are driven in PAIRed mode.

	Path closed*	Path open*
SW1 Path1	ROUT:OPEN (@xx01)	ROUT:CLOS (@xx01)
SW1 Path2	ROUT:OPEN (@xx02)	ROUT:CLOS (@xx02)
SW1 Path3	ROUT:OPEN (@xx03)	ROUT:CLOS (@xx03)
SW1 Path4	ROUT:OPEN (@xx04)	ROUT:CLOS (@xx04)
SW1 Path5	ROUT:OPEN (@xx05)	ROUT:CLOS (@xx05)
SW1 Path6	ROUT:OPEN (@xx06)	ROUT:CLOS (@xx06)
	State A	State B
SW2	ROUT:OPEN (@xx07)	ROUT:CLOS (@xx07)
SW3	ROUT:OPEN (@xx08)	ROUT:CLOS (@xx08)

* For switches connected to SW1, note the path closed is accomplished with the ROUTe:OPEN command.

L4400 User’s Guide 167