2Software Installation and Configuration

Adding Instruments to the GPIB Configuration

Highlight the GPIB interface (GPIB0) and select “Add Instrument” on the tool bar. Select the GPIB interface in the “Add Instrument” window and click ‘OK’.

Figure 2-16. Adding Instruments to the GPIB Interface.

In the ‘configurable properties’ window shown in Figure 2- 17, select GPIB address 9 and click ‘OK’. This is the factory default address that will be changed as necessary in the following steps.

Figure 2-17. Specifying the GPIB Address when Adding an Instrument.

34

L4400 User’s Guide

Page 44
Image 44
Agilent Technologies L4400 manual Adding Instruments to the Gpib Configuration, Adding Instruments to the Gpib Interface