Agilent Technologies L4400 manual L4451A Scpi Command Summary

9L4451A 4-Channel Isolated D/A Converter with Waveform Memory

N O TE	The line between external Trigger Out and external Trigger In is
	shared. You can use the external Trigger Out to provide the external
	Trigger In signal. However, both a user-supplied external trigger and
	the L4451A Trigger Out cannot drive the line at the same time.

L4451A SCPI Command Summary

Table 9-1 lists the instrument-specific SCPI commands that apply to the L4451A 4-Channel Isolated D/A Converter instrument. Table 3-3 (Chapter 3) lists the SCPI commands that apply to all L4400 series instruments.

For complete information on all SCPI commands, refer to the Programmer’s Reference contained on the L4400 Product Reference CD-ROM (p/n 34989-13601).

	Table 9-1. L4451A SCPI Command Summary.
Subsystem	Commands
SOURce	SOURce:CURRent[:LEVel] {<current>MINMAXDEF}, (@<ch_list>)
(DAC
Configuration)	SOURce:CURRent[:LEVel]? [{MINMAX}, ] (@<ch_list>)
	SOURce:FUNCtion:TRIGger:SOURce {IMMediateMANualEXTernal},
	(@<ch_list>)
	SOURce:FUNCtion:TRIGger:SOURce? (@<ch_list>)
	SOURce:MODE {VOLTageCURRent}, (@<ch_list>)
	SOURce:MODE? (@<ch_list>)
	SOURce:MODule:CLOCk:FREQuency {<frequency>MINMAXDEF}, 1
	SOURce:MODule:CLOCk:FREQuency? [{MINMAX}, ] 1
	SOURce:MODule:CLOCk:STATe {OFF0ON1}, 1
	SOURce:MODule:CLOCk:STATe? 1
	SOURce:MODule:TRIGger:EXTernal:IMMediate 1
	SOURce:MODule:TRIGger:OUTPut {OFF0ON1}, 1
	SOURce:MODule:TRIGger:OUTPut? 1
	SOURce:VOLTage[:LEVel] {<voltage>MINMAXDEF}, (@<ch_list>)
	SOURce:VOLTage[:LEVel]? [{MINMAX}, ] (@<ch_list>)
(Trace	SOURce:FUNCtion:CLOCk:EXTernal:DIVisor {<value>MINMAXDEF},
Waveform	(@<ch_list>)
	SOURce:FUNCtion:CLOCk:EXTernal:DIVisor? [{MINMAX}, ] (@<ch_list>)
Configuration)
	SOURce:FUNCtion:CLOCk:SOURce {INTernalEXTernalSTEP}, (@<ch_list>)
	SOURce:FUNCtion:CLOCk:SOURce? (@<ch_list>)
	SOURce:FUNCtion:CURRent:GAIN {<gain>MINMAXDEF}, (@<ch_list>)
	SOURce:FUNCtion:CURRent:GAIN? [{MINMAX}, ] (@<ch_list>)

226 L4400 User’s Guide