Agilent Technologies L4400 manual L4452A Scpi Command Summary

L4452A Multifunction Module with DIO, D/A, and Totalizer 10

L4452A SCPI Command Summary

Table 10- 1 lists the instrument- specific SCPI commands that apply to the L4452A Multifunction Module instrument. Table 3- 3 (Chapter 3) lists the SCPI commands that apply to all L4400 series instruments.

For complete information on all SCPI commands, refer to the

Programmer’s Reference contained on the L4400 Product Reference

CD- ROM (p/n 34989- 13601).

	Table 10-1. L4452A SCPI Command Summary.
Subsystem	Commands
CONFigure
(Digital I/O)	CONFigure:DIGital {BYTE1WORD2LWORd4}, [<voltage>,]
	[{NORMalINVerted},] (@<ch_list>)
	CONFigure:DIGital:DIRection {INPut0OUTPut1}, (@<ch_list>)
	CONFigure:DIGital:DIRection? (@<ch_list>)
	CONFigure:DIGital:WIDTh {BYTE1WORD2LWORd4}, (@<ch_list>)
	CONFigure:DIGital:WIDTh? (@<ch_list>)
MEASure	MEASure:DIGital? {BYTE1WORD2LWORd4}, [<voltage>,]
(Digital I/O)	[{NORMalINVerted} , ] (@<ch_list>)
SENse
(Digital I/O)	[SENSe:]DIGital:DATA[:{BYTE1WORD2LWORd4}]? [{DECimal
	BINaryHEXadecimalOCTal},] (@<ch_list>)
	[SENSe:]DIGital:DATA:BIT? <bit>, (@<ch_list>)
(Totalizer)	[SENSe:]TOTalize:CLEar:IMMediate (@<ch_list>)
	[SENSe:]TOTalize:DATA? (@<ch_list>)
	[SENSe:]TOTalize:SLOPe {NEGativePOSitive}, (@<ch_list>)
	[SENSe:]TOTalize:SLOPe? (@<ch_list>)
	[SENSe:]TOTalize:THReshold[:MODE] {ACTTL}, (@<ch_list>)
	[SENSe:]TOTalize:THReshold[:MODE]? (@<ch_list>)
	[SENSe:]TOTalize:TYPE {READRRESet}, (@<ch_list>)
	[SENSe:]TOTalize:TYPE? (@<ch_list>)
(Digital	[SENSe:]DIGital:MEMory:COMPare:ACTion {CONTinueSTARtSTOP},
	(@<ch_list>)
Pattern
	[SENSe:]DIGital:MEMory:COMPare:ACTion? (@<ch_list>)
Compare)

L4400 User’s Guide 237