Sense Data Values
Table 22: Sense data values (Hexadecimal) (Continued)
Sense |
|
|
|
Key | ASC | ASCQ | Message Name/Description |
B | 8C | 01 | LOAD PORT LATCH FAILURE |
|
|
| The load port door was unlocked, but did not leave its current |
|
|
| position before |
|
|
| being stuck, or in the case of a close operation, the operator not |
|
|
| moving the door. |
|
|
|
|
4 | 8C | 06 | LOAD PORT DOOR OPEN |
|
|
| Load port door unlocked but failed to open. |
|
|
|
|
4 | 8E | 03 | CABINET CONTROLLER UNABLE TO UPLOAD |
|
|
| Unable to upload firmware to the cabinet controller. |
|
|
|
|
4 | 8E | 04 | ROBOTICS CONTROLLER UNABLE TO UPLOAD |
|
|
| Unable to upload firmware to the robotic controller. |
|
|
|
|
B | 8F | 00 | LIBRARY UNIT COMMAND TIMED OUT |
|
|
| Verify that communications to library still exists by issuing another |
|
|
| command. |
|
|
|
|
4 | F3 | 02 | DRIVE COMMUNICATION TIMEOUT |
|
|
| The library is unable to communicate with a drive. |
|
|
|
|
4 | F3 | 20 | DRIVE UNLOAD FAILED OR TIMED OUT |
|
|
| The command to the drive to unload the tape failed to complete or |
|
|
| timed out. |
|
|
|
|
4 | F3 | 21 | DRIVE EJECT FAILED OR TIMED OUT |
|
|
| The command to the drive to eject a tape failed to complete or time |
|
|
| out. |
|
|
|
|
4 | F3 | 22 | DRIVE LOAD FAILED OR TIMED OUT |
|
|
| The command to the drive to load a tape failed to complete or timed |
|
|
| out. |
|
|
|
|
4 | F3 | 23 | DRIVE THREAD FAILED OR TIMED OUT |
|
|
| The command to the drive to thread a tape failed or timed out. |
|
|
|
|