HP ESL E manual Move command

Maintenance and Troubleshooting

Table 11: Problems during library operation (Continued)

Problem		Corrective Action
A move command	■	Check the source and destination. The source should
failed.		hold the cartridge to be moved; the destination
		should be empty.
	■ Make sure the picker is empty and that there are no
		obstructions.
	■ Also, make sure the library is on-line and the Stop
		button is released.
	■	Retry the command.
A flash memory error is	Contact your service provider.
reported.
A maximum	■	Turn off the library and allow it to cool down. Lower
temperature exceeded		the room temperature, if possible, and increase
warning is displayed.		ventilation around the library.
		The air filters may need to be changed.
	■
	■ If the operating temperature is too high, the library
		automatically shuts down until the temperature drops.

ESL E-Series Tape Library User’s Guide 81