System Information and Setup
●Software Version : Displays the current version. Setup is not available.
●Broadcast Format : Displays the current Format(NTSC/PAL) . Setup is not available.
●Mac Address : 6 Byte hardware address. Setup is not available.
●Device Erase
This erases the data in ATA / USB HDD / USB memory. Click the checkbox of the device that you want to erase and press “OK” You are not allowed to erase the data in Backup progress.
●USB S/W Upgrade
You can update the program by use of USB device. If there is no device, "USB S/W Upgrade fail" window pops up.
Note 1
[Internal HDD]
This is a physical hard disk connected with the IDE cable inside the
[External HDD]
This is a physical hard disk connected with the port and terminal in the back of the
This can be used as Extended HDD or Backup HDD.
-Extended HDD : Supplements Internal HDD quantity. Connected, it takes the place of Internal HDD.
-Backup HDD : Backs up the data recorded in the set.
Note 2
[ATA]
Usage : Internal HDD
This is a physical hard disk connected with the IDE cable inside the
Usage : External HDD(Extended HDD or Backup HDD)
This is a physical hard disk connected with the USB port in the back of the
