6.Re-mount the built-in HDD bracket-HDD to the place where it was removed from. Place the bracket-HDD(A) so that all the five fixing areas in the bottom and the bracket- HDD’s fixing holes can perfectly aligned, then slide it outward of the product and tighten the screws. For the bracket-HDD (B), place it so that all the four fixed areas at the bottom and the bracket-HDD’s fixed holes can perfectly aligned, then tighten the screws.)
7.Make sure that the bracket-HDD is mounted stably inside of the product, then connect the power supply cable and signal transmission cable (IDE cable) to the HDD.
MASTER HDD
SLAVE HDD
