Whirlpool MW8600XS manual Using your microwave oven, Microwave oven controls, Command pads

Using your microwave oven

Microwave oven controls

There are three parts in the control section:

-The Digital Display/Clock, and Indicator Lights

-Command Pads -Number Pads

Instructions for each control are covered on the following pages. Read them carefully.

When you first plug in the oven, a tone sounds and the Display will show 88:88. If after you set the Clock (page 6), the Display again shows all 8’s, your electricity was off for a while. Reset the Clock.

Di ital display/clock and in ii icator lights

When you are not using the microwave oven, this is an accu- rate digital clock.

When you are using the microwave oven, it displays time settings, indicator lights and shows what number pads you touched.

Command pads

Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:

-CLOCK SETtells the oven you are going to set the clock.

-START tells the oven to start.

See page 6 for informa- tion on the tone you hear when touching any

Each Command Pad, (except START,CANCEL and CLOCK SET] lights an Indicator Light on the digital display. The Indicator Light comes on when you touch the Command Pad.

While the ovenis running, an Indicator Light (or lights] will be on to show what the oven is doing.

Number pads

omm

mRam

mmm

Once you’ve touched a Com- mand Pad to tell the oven what you want it to do, you’ll touch Number Pads to tell it...

- a time,

-a Cook Power,

-a food temperature.

5