86 APPENDIX : ERROR MESSAGES
Error, unexpected command line format
The user did not supply an IP address, or (Non-GUI only) did not provide a
filename.
Command Tool The following are the Command Tool error messages and what they indicate.
Missing -E option
The user did not choose a command to execute using the -E option. (Non-GUI
only)
Missing -G option
The user did not choose a command group using the -G option. (Non-GUI
only)
Non-graphical time slot selection is not supported: <specification>
The user requested time slot selection in the non-GUI by supplying an empty
time slot range (e.g., S1C1T). (Non-GUI only)
Warning: force not supported for this command
The user provided the -F option for a command that does not allow forcing.
The -F option will be ignored. (Non-GUI, warning only)
Error: invalid poll interval value <value> for -p option
The poll interval value given on the command line is not a positive integer.
Error: cannot use -E and -q at the same time
The user specified both a command and a command query. This is not allowed.
Error: No target specified
The user did not supply at least an IP address or host name on the command
line.
Error: Too many targets specified
The user specified more than one IP address/slot-channel combination. (There
is more than one whitespace-separated w ord in the target list.)
Invalid target format
The target does not specify a valid IP address or host name.
Configuration Tool The following are the Configuration Tool error messages and what they
indicate.
Error: No target specified
The user did not supply at least an IP address or host name on the command
line.