92 APPENDIX : ERROR MESSAGES
Missing or invalid device.dat file!
IP Telephony Manager has a corrupt device configuration schema, or other
internal error.
Missing or invalid software.dat file!
IP Telephony Manager has a corrupt device configuration schema, or other
internal error.
IP Telephony Manager Discovery error: <specific error>
An error occurred in attempting to launch IP Telephony Manager against a
chassis (e.g., the discovery process timed out or had some other error).
Invalid host name: <name>
IP Telephony Manager was launched against a host name not in the hosts
database.
Target Selection Error
The user was prompted for target slot/channels using the chassis selection
dialog. After targets were selected, an internal error occurred.
Chassis Restore The following are the Chassis Restore error messages and what they indicate.
Configuration parse error: <specific error>
The chassis configuration file being restored is invalid and the restore will not
occur. (Nonfatal configuration parse warnings are also produced.)
File is not a Chassis Configuration File
The user specified a file that does not begin with the CommWorks chassis
configuration file header.
Can’t access <filename>
The user specified a file that does not exist or is not readable.
<filename> is a directory.
The user specified a file that is a directory. Only plain text files may be
restored.
There is no matching configuration to restore
The chassis configuration file being restored contains no parameters to be
restored, or those sections which actually match working target slots (if any)
contain no parameters.
Restore was unsuccessful
At least one of the slots being restored experienced an SNMP error or other
serious failure. ("Bad cards" that are skipped by the restore are not counted in
this evaluation.)