Saving and Restoring Configurations 45
Figure 20 Restore Chassis NVRAM Dialog Box
2Enter or select the .whb file you are restoring from and click OK.
The default directory for .nvr files is: $TCMHOME /data/nvram/.
If you are saving or restoring from the command line and you are not using the
x prefix option, progress is reported as status messages on screen. For more
information refer to Appendix B, Command Line Interface.
The Chassis Restore Progress window appears.
3When the restore is completed click OK.
Component Save to
NVRAM
Some device components, such as modems, store their settings in their own
NVRAM and use them for power-on and reset defaults.
To save a component’s settings to NVRAM:
1Select the component whose configuration you are saving on the IP Telephony
Manager console display.
2Select Configuration from the IP Telephony Manager Console window.
3Select Action/Commands from the drop-down menu.
4Click the Card Level radio button.
5Select Software in the Category box.
6Select Both T1/E1 and Modem to NVRAM in the Command to Execute box.
To load a component’s NVRAM settings, issue the Restore from NVRAM
command from the same command group as the Save to NVRAM command.