124 APPENDIX : COMMAND LINE INTERFACE
Slot Level Events and
Responses
The following are the events and the responses to the events from the
AutoResponse command
Events:
■Module Inserted
■Module Re-initialized
■Module Removed
■Module Non-operational
■Module Watchdog Time-out
Responses (the "(N)" notation indicates that the response requires a
parameter):
■Generate AutoResponse SNMP TRAP ID (N)
■Delay Script Execution (N) Seconds
■Terminate Script Execution
■Continue if Test Passes
■Configure Module from NMC NVRAM
■Configure Module from NMC Factory Defaults
■Remove Module from Service
■Restore Module to Service
■Test Module
■Reset Module
■Busy-Out Module’s Analog Phone Lines
■Restore Module’s Analog Phone Lines
The last two responses pertaining to analog phone lines are not available on
slots that contain an unknown card type.
Modem Channel Level
Events and Responses
The following are the events and the responses to the events from the
AutoResponse command.
Events:
■Incoming Connection Established
■Outgoing Connection Established
■Incoming Connection Terminated
■Outgoing Connection Terminated
■Connection Attempt Failed
■Connection Time Limit Expired