Execution Errors 95
Cannot load between channel and card levels
The "load from" source is at channel level while the target devices are at card
level, or vice versa.
Missing device configuration file
There is no configuration schema file for the target devices.
There are no configurable parameters for this type of card
The target slot or channel has no configurable parameters.
Modification(s) in current group will be overwritten. Proceed with update?
Issued in a "Yes/No" dialog when the user selects "get" in a group that has
un-set modifications. (Warning only)
Modification(s) in all groups will be overwritten. Proceed with load ing?
Issued in a "Yes/No" dialog when the user selects "load from" and there are
groups that have un-set modifications. (Warning only)
Test Tool The following are the Test Tool error messages and what they indicate.
No defined tests to execute
The device configuration files do not list any tests for the target device.
Invalid Test: <string>
The specified test is not in the list of valid tests.
Selected device is not a modem
Test Tool may be invoked only against modems.
No "Software Commands" found
The Test Tool could not locate the list of tests within the "Software
Commands" group of the device configuration file. This indicates a probable
internal error or corrupt device configuration schema.
An unrecoverable error has occurred.
An SNMP error or other problem prevented the cycle of tests from being issued
to all target devices. The user may retry the test if desired. Detailed error
information may be available in the IP Telephony Manager log.
Unrecoverable error
An SNMP error or other problem prevented the cycle of tests from being issued
to all target devices. The user may retry the test if desired. Detailed error
information may be available in the IP Telephony Manager log.
<target>: Non-Modem Test operation
Reported in the test tool final summary when a command or other
non-modem test result is in the target’s result table. (Non-GUI, warning only)