IBM SC30-3681-08 Accessing the Virtual ATM Interface Conguration Process, ATM Virtual Interface Conguration Commands

Accessing the Virtual ATM Interface Configuration Process
From the ATM Config> prompt of a selected real ATMinterface, use the Virtual ATM
command to enter the Virtual ATMconfiguration command mode.
ATM Virtual Interface Configuration Commands
This section summarizes the ATMvirtual interface configuration commands. Enter
the commands at the ATM virtual interface config> prompt.
Table37. ATM Virtual Interface Configuration Command Summary
Command Function
? (Help) Displays all the commands available for this command level or
lists the options for specific commands (if available). See
“Getting Help” on page 10.
Add Adds a virtualATM interface.
List Lists the current configured virtual ATM interfaces.
Remove Removesthe virtual ATM interface from the current
configuration.
Exit Returns you to the previous command level. See “Exiting a
Lower Level Environment” on page 11.
Add
Use the add command to add an ATMvirtual interface. A new ATM virtual interface
is added to the corresponding ATMreal interface (the configuration menu from
which this ATMvirtual interface configuration menu is accessed). The net/interface
number assigned to the newly created ATMvirtual interface is displayed and it is
one number greater than the current largest interface number.
Syntax:
add
Example:
ATM Virtual Interface config> add
Added ATM Virtual Interface Net as interface 5 on physical ATM interface 0
ATM Virtual Interface config>
List
Use the list command to list configured ATMvirtual interfaces defined on the
current real ATMinterface.
Syntax:
list
Example:
ATM Virtual Interface config> list
ATM Virtual Interface Nets
----------------------------------------------------------------------
ATM interface number = 0
ATM Virtual Interface Net interface number = 5
ATM Virtual Interface config>
ATM Interface Configuration Commands (Talk6)
Chapter22. Configuring and Monitoring ATM 285