IBM SC30-3681-08 manual Group

Config>protocol brly

BSC Relay protocol user configuration BRLY config>add group

Local group number: [1]?

Point to Point connection?(Yes or [No]): BRLY config>add local

Local group number: [1]?

Interface number: [0]? 1

(P)rimary or (S)econdary: [S]? p

Does this interface communicate with multiple remote groups [N]? y

BRLY config>add		remote
Local group number: [1]?
IP address of remote router: [0.0.0.0]? 6.6.6.1
Remote router group number: [1]?
(P)rimary or (S)econdary: [S]? s
Station address		in hexadecimal (1 - FF): [1]? c1
BRLY config>li all
		BSC Relay Configuration
Local	Group		Port	Net	Remote	Station	IP
Group	Type	Status		Number	Group	Address	Address
------	-----	-----------------		------	------	-------	---------------
1 (E)	MULTI	Local PRMRY (E)		1
		Remote SCNDRY (E)			1	C1	6.6.6.1
E = enabled, D		= disabled
BRLY config>add		group
Local group number: [1]? 2
Point to Point connection?(Yes or [No]):
BRLY config>add		local
Local group number: [1]? 2
Interface number: [0]? 1

(P)rimary or (S)econdary: [S]? p

Does this interface communicate with multiple remote groups [N]? y

BRLY config>add		remote
Local group number: [1]? 2
IP address of remote router: [0.0.0.0]? 6.6.6.2
Remote router group number: [1]? 2
(P)rimary or (S)econdary: [S]? s
Station address		in hexadecimal (1 - FF): [1]? c5
BRLY config>li all			BSC Relay Configuration
Local	Group		Port	Net	Remote	Station	IP
Group	Type		Status	Number	Group	Address	Address
------	-----	-----------------		------	------	-------	---------------
1 (E)	MULTI	Local	PRMRY (E)	1
		Remote SCNDRY (E)			1	C1	6.6.6.1
2 (E)	MULTI	Local	PRMRY (E)	1
		Remote SCNDRY (E)			2	C5	6.6.6.2
E = enabled, D		= disabled

Figure 33. BRLY Con®guration for Router A (Commands entered at Router A)

Notes:
1.	The con®guration for group 1 starts at	.
2.	The con®guration for group 2 starts at	.

Chapter 39. Using Binary Synchronous Relay (BRLY) 563