IBM SC30-3681-08 manual Last Cllm cause code, PVCs P1 allowed, Interface down if no PVCs

Monitoring Frame Relay Interfaces

Timer Ty seconds

Indicates the value of the CLLM Ty timer. This ®eld is only

displayed if CLLM is enabled.

Last CLLM cause code

Indicates the congestion cause code given in the last CLLM

message received or None if no CLLM messages have been

received. This ®eld is only displayed if CLLM is enabled.

SVC network number

Speci®es the network number for the SVCs on this interface.

SVC number type

Speci®es the SVC number type, unknown or international.

SVC numbering plan

Speci®es whether the numbering plan is E.164 or X.121.

SVC call-out redial attempts

Speci®es the number of call-out redial attempts on this interface.

SVC network emulation mode

Speci®es whether this interface operates in network emulation

mode for SVCs.

SVC call-ins allowed

Speci®es whether call-ins are allowed on this interface.

Protocol broadcast

Indicates if protocols such as IP RIP are able to operate over the

Frame Relay interface.

Congestion monitoring

Indicates whether the congestion monitor feature that responds to

network congestion is enabled (yes or no).

Emulate multicast

Indicates whether the multicast emulation feature is enabled on

each active PVC (yes or no).

CIR monitoring

Indicates whether the circuit monitoring feature that enforces the

transmission rate is enabled (yes or no).

PVCs P1 allowed

Indicates the number of allowable VCs for use with this interface.

This number is the maximum number of active, congested, inactive,

and removed VCs that can be supported on the interface.

Interface down if no PVCs

Indicates whether the router considers the interface unavailable

when there are no active PVCs.

Line speed (bps)

Indicates the con®gured data rate of the Frame Relay interface.

Timer T1 seconds

Indicates the frequency with which the Frame Relay interface

performs a sequence number exchange with the Frame Relay

switch LMI entity.

Counter N1 increments

Indicates the number of T1 timer intervals which must expire before

a complete PVC LMI status enquiry is made.

438MRS V3.2 Software User's Guide