IBM SC30-3681-08 Conguring and Monitoring ATM, Accessing the ATM Interface Conguration Process

Chapter 22. Con®guring and Monitoring ATM

This chapter describe the ATM interface con®guration and operational commands. It includes the following sections:

vªAccessing the ATM Interface Con®guration Processº

vªATM Con®guration Commandsº on page 278

vªATM Interface Con®guration Commandsº on page 278

vªATM Virtual Interface Con®guration Commandsº on page 285

vªATM Virtual Interface Monitoring Commandsº on page 290

vªAccessing the ATM Monitoring Processº on page 286

vªATM Monitoring Commandsº on page 286

vªATM Interface Monitoring Commands (ATM INTERFACE+ Prompt)º on page 287

vªATM-LLC Monitoring Commandsº on page 290

Accessing the ATM Interface Con®guration Process

The ATM carrier card and the 25 Mbps Charm Adapter must be in the feature slot before ATM can be con®gured. You must reload the router after the feature slot has the ATM carrier card/25 Mbps Charm Adapter combination in place.

Use the following procedure to access the con®guration process.

1.At the OPCON prompt, enter talk 6. (For more detail on this command, refer to ªChapter 3. The OPCON Processº on page 25.) For example:

* talk 6 Config>

The CONFIG prompt (Config>) displays on the console. If the prompt does not appear when you ®rst enter con®guration, pressReturn again.

2.At the CONFIG prompt, enter the list devices command to display the network interface numbers for which the router is currently con®gured.

3.Record the interface numbers.

If ATM is not speci®ed as an interface, then execute the quick con®guration process, qcon®gto dynamically add the ATM interface.

4.Enter the network command and the number of the ATM interface you want to con®gure. For example:

The ATM con®guration prompt ATM( Config>), is displayed.

© Copyright IBM Corp. 1994, 1998 277