Con®guring SDLC Interfaces

Enter station name

The name designation of the SDLC station (maximum characters is 8).

Include station in group poll list

Select whether or not to include this station in the group poll list for this link. The SDLC software supports the IBM 3174 group poll function for SDLC secondary station. You must add a group poll address using the set link group-pollcommand for this parameter to have an affect.

Enter max packet size

The maximum packet size that can be sent to or received from the remote link station. This value cannot be greater than that speci®ed for the link. This value is con®gured with theset link frame-sizecommand.

Enter receive window

The maximum number of packets that the router can receive without sending a response.

Enter transmit window

The maximum number of packets that the router can transmit without receiving a response.

Delete

Use the delete command to remove the speci®ed end station (station name or address) from the SDLC con®guration. The router is considered the primary end station (default).

Syntax:

delete

station name or address

Disable

Use the disable command to prevent connections from being created with a SDLC link station.

Syntax:

 

disable

link

 

station . . .

link Prevents the transmitting and receiving of data to all con®gured SDLC link stations on the interface.

station name or address

Prevents the transmitting and receiving of data to the speci®ed end station (station name or address).

Enable

Use the enable command to enable connections to remote SDLC link stations.

Syntax:

 

enable

link

 

station

Chapter 38. Con®guring and Monitoring SDLC Interfaces 541

Page 577
Image 577
IBM SC30-3681-08 manual Enter station name, Include station in group poll list, Enter max packet size, Enter receive window