IBM SC30-3681-08 Circuit Type, Pvc-groups, Protocol-addresses, Protocol Type, Protocol Address

Con®guring Frame Relay Interfaces

Circuit Name

Indicates the ASCII designation of the con®gured PVC.

Circuit Number

Indicates the DLCI of a currently con®gured PVC.

Circuit Type

Indicates the type of virtual circuit currently con®gured. This release of Frame Relay only supports permanent virtual circuits.

Committed Information Rate

Indicates the information rate at which the network agrees to transfer data under normal conditions.

Committed Burst Size

The maximum amount of data in bits that the network agrees to deliver during a measurement interval equal to (Committed Burst Size/CIR) seconds.

Excess Burst Size

The maximum amount of uncommitted data in bits in excess of Committed Burst Size that the network attempts to deliver during a measurement interval equal to (Committed Burst Size/CIR) seconds.

pvc-groups

Displays all the Required PVC groups on the Frame Relay interface.

Example:

list pvc-groups

Required PVC group = group1

Circuit # 16

protocol-addresses

Displays all the statically con®gured protocol addresses of circuit mappings at the Frame Relay interface.

Example:

list protocol-addresses

Frame Relay Protocol Address Translations
Protocol Type	Protocol Address			Circuit Number or Name
-------------	----------------			----------------------
IP	125.2.29.4			21
IPX	000000004503			16
Protocol Type
Displays the name of the protocol running over the interface.
Protocol Address
Displays the protocol address of the device at the other end of the
circuit.
Circuit Number or Name
Displays the DLCI of the PVC or the name of the SVC that is
handling the protocol.
switched-virtual-circuits
FR 4 Config>list s
Maximum circuits allowable =		64
Total circuits configured =		9
Total SVCs configured	=	2
Circuit		Opt-	Idle	Outgoing	Incoming
Name		ions	Timer	Value	Value
-------------------------------- ----- ------				----------	----------

424MRS V3.2 Software User's Guide